云南白秧坪多金属成矿区构造特征及其控矿作用

通过区域地质构造、矿区构造特征分析 ,论述了云南白秧坪多金属成矿区东矿带、西矿带的主要地质构造特征及其构造控矿作用 ,并探讨了区域构造导矿与成矿及其对成矿带的控制作用、小型褶皱及推覆构造对矿床的控制作用、次级断裂对矿体的控制作用、构造环境下岩石的屏蔽与容矿作用和构造环境中碳质来源及其成矿作用等问题     

用镁合金促进兵器装备轻量化

概述了兵器装备轻量化的意义、镁合金的性能特点 ,介绍了镁合金在兵器上应用的实例 ,指出了镁合金在兵器上应用存在的问题 ,分析了镁合金在兵器上应用的前景 ,对镁合金在兵器上的应用工作提出了若干建议     

脱硫用煤基吸附剂的试验研究

进行了以煤为原料制备脱硫用吸附剂的实验研究，其中应用炭化与活化的方法，以对ＳＯ２吸附能力为衡量标准，系统地考察了样品在制备过程中不同温度，不同温升速率及时间对ＳＯ２吸附分离能力的影响，力求找出相应的最佳处理过程，并对机理进行探讨。     

AMS方法在大气气溶胶来源研究中的应用

在我国自己建立的加速器质谱计（ＡＭＳ）技术的基础上,利用＾１４Ｃ的特征的生物来源示踪性能,将ＡＭＳ技术运用于我国大气气溶胶来源的研究,我们建立了大气气溶胶采样－－石墨碳制备－ＡＭＳ测定的全部样品处理过程,对北京市中关村地区、东单地区在采暖期和非采暖期的气溶胶样品和湖南南岳、山东青岛的气溶胶及这些地区的地表土进行了ＡＭＳ测定,将多元统计方法与ＡＭＳ方法相结合,从中分析这些样品中微量元素组分和含碳 分     

油松排放萜烯类化合物浓度的日变化及排放速率的研究

 采用封闭式采样和气相色谱法分析监测了北京主要树种油松排放的萜烯类化合物，其中包括α和β蒎烯、蒈烯、松油烯、柠檬烯和罗勒烯，以及少量异戊二烯。松油烯、B蒎烯、柠檬烯和蒈烯的排放量之和占油松排放碳氢总量的94％以上。萜烯和异戌二烯排放速率随日照和温度的升高而增加。萜烯等浓度的日变化表明在正午和午夜油松有两个排放高峰。在日均气温为18℃时油松的碳氢化合物平均总排放速率约为8.7μh/h.g。     

上海市污水处理设施问题探析

介绍了上海市污水处理设施的现状，并剖析了其存在的问题，如管网配套建设问题，有效处理问题，污水回用及设施的运行管理等。在此基础上，提出了一些有针对性的调控对策建议，以促进上海的水资源可持续利用。     

Chemical characteristics of cloudwater over Maoer Mountain district

Samples of cloudwater, rainwater and ambient aerosol were collected over Maoer Mountain in the northeast of Guangxi Province in March 1988. The pH value of cloudwater ranged from 3.37 to 6.20 with a mean value of 4.34. SO42- , NO3- , NH4+, Ca2+ and H+ were the principal ionic species of cloudwater. The advance of cold fronts into Maoer Mountain appeared to lead to higher major ionic concentration and acidity than that of warm fronts. The relative acidity and concentration of NO3- of cloudwater were much greater than that of aerosol samples. With the exception of. NO3- and H+, most of the concentration of SO42- and NH4+ in cloudwater came from the nucleation scavenging of aerosol. Gaseous nitric acid and organic acid from local may be one of the important source of cloudwater acidity. Compared with other sites, Maoer Mountain can be as a clean contrast station for studying acidic precipitation in Guangdong and Guangxi provinces.     

Water pricing towards sustainability of water resources: a case study in Beijing

The role of water pricing for managing water resources is widely recognized in many areas of the world because of the increasing scarcity of water resources, a high competition between water uses and environmental degradation. Based on the analysis of cost of water, this paper explores which types of cost should be reflected in the water pricing enhancing the sustainability of water resources. The principle of full cost pricing in which the cost should include supply cost, opportunity cost and externalities is proposed as a means to achieve the sustainability of water resources. In a case study of Beijing, low water price is analyzed as one reason for unsustainable water consumption. Thus water pricing justified is necessary and pressing. It is proposed to justify water price in phased manner and eventually towards full cost pricing. The assessment of impacts on water resources by raising water price shows water pricing could alleviate the conflict between water supply and demand. This paper concludes that water pricing can play an effective role in enhancing the sustainability of water resources in Beijing.     

高强度高精度螺栓热后毛坯的矫直

利用搓丝原理 ,在自动搓丝机上 ,对热处理后的高强度螺栓毛坯进行矫直处理 ,提高了产品合格率和生产效率。     

白腐菌氧化—混凝工艺处理纸浆漂白废水试验研究

报告用白腐真菌氧化—混凝工艺处理纸浆厂四段漂白混合废水的试验情况 ,在最佳工艺条件下 ,混凝处理出水CODCr、OD4 6 5分别为 1 85 .1mg/L、0 .0 0 4 2 ,去除率分别为 86 .5 %、99.4% ,实验结果表明 :白腐真菌氧化—混凝工艺对于纸浆漂白废水是一种有实用价值的处理工艺。